Please, check the size for Acura MDX 2014 wheels. i believe bolt pattern is 5x114 not 5x120 as on your website. Regards
The bolt pattern on the 2014 MDX is 5-114.3 not 5-120. The offset may have changed to 55mm as well, but I do not yet have definitive evidence on this issue. Smaller offsets (like 40mm) appear to work well. Seehttp://www.mdxers.org/forums/94-new-2014-acura-mdx/58442-what-2014-rim-specs.html This thread reports on experience of a 2014 MDX owner who installed custom wheels. Wheels with a 5-120 bolt pattern will NOT work.
The 2014 Acura MDX bolt patter is actually 5x114.3
'11 Acura MDX's 18" wheel offset is 45mm and the center bore is 64.1mm.
Hi, OmerMurat! Thanks for info, we have updated data.
Hi again,2011 Acura MDX's lug nuts are M14x1.5!
Hi, OmerMurat, thanks again!
What's bolt pattern for 11' mdx
Hi, Earl,For 2011 mdx,The bolt pattern is 5*120
Will a 2016 Honda pilot 20 inch wheel fit a 2010 acura mdx with factory 18 inch wheel? Center bore bolt pattern and lug sizes are the same between the 18 inch acura wheel and the 20 inch Honda wheel, but the offsets are different.
Hi,Berto,the compatible offset difference is +-5mm.you can check it.
I'm trying to see if 2005 Acura MDX wheel will fit on my 2009 Honda CR-V. Have gotten conflicting information from CR-V forums seemingly informed opinions and stats on this site.Does the Acura rim have 14 mm X 1.50 wheel studs/lugs or 12mm X 1.50 that the Honda has too. I was told that Honda/Acura only used(s) the larger 14mm lug on wheels with 5 X 120mm bolt pattern (?)...Is the wheel bolt pattern on the Acura wheel114.3 X 5 (as Honda is and as is listed on this site) or is it 5 X 120???This site indicates that the Acura wheel is 14mm studs in a 5 X 114.3 pattern???I've emailed this site for "clarification"/review.Anyone here know any different/better ????
Hi,Mike,Acura MDX have two different bolt pattern 5*114.3 and 5*120.5*114.3 for 2007 year model and before.5*120 for 2008 year model and until now.If you want to change rims,you can check the back of wheel spoke and see which one is.For the lugs.I think it is 12*1.5,you can check this link http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.XAcura+MDX+wheel+lugs.TRS0&_nkw=Acura+MDX+wheel+lugs&_sacat=0
Hi, Mike! Thanks for the info, we have updated data! You are absolutely right, similarly according Rockauto.com and Acura USA EPC cars only with 5x120 have M14 nuts.
Hi I am about to buy 10 X 20" 5x120 ET35 rims for my 2013 MDX. Per size chart they should fit, but different rim sites do not guarantee fitment (too wide). Does anybody have experience with actually trying one that size on their 2011-2013 mdx.
Hi,Jay,The stock wheel size is 18*8.0,So if you use 20*10"",it is truelly too wide.