1995 Acura TL Wheel fitment guide Find out what wheels and tires fit 1995 Acura TL
1995 Acura TL UA1/3 [1995 .. 1998] - Modifications
Acura TL UA1/3 [1995 .. 1998] 2.5i
176 hp- Generation: UA1/3 [1995 .. 1998] [USDM]
- Production: [1995 .. 1998]
-
Sales regions: USA+
-
Power: 176 hp | 131 kW | 178 PS
- Engine: , Petrol
-
Center Bore / Hub Bore:
-
Bolt Pattern (PCD): ()
-
Wheel Fasteners: Lug nuts
-
Thread Size:
-
Wheel Tightening Torque:unknown
| Tire | Rim | Offset Range mm | Backspacing mm inches | Tire Weight kg lb |
bar psi
|
||
|---|---|---|---|---|---|---|---|
| OE 205/60R15 91H | 6Jx15 ET55 | 53 - 57 | 144 5.67 | 10.3 22.6 | 2.1 30 |
OE
|
|
| 205/55R16 89H | 6.5Jx16 ET55 | 150 5.91 | 10.0 22.1 | 2.3 33 |
|
||
| 215/55R16 91H | 6.5Jx16 ET55 | 150 5.91 | 10.7 23.5 | 2.3 33 |
|
||
| 215/45R17 89V | 7Jx17 ET50 | 152 5.98 | 9.5 21.0 | 2.5 36 |
|
Acura TL UA1/3 [1995 .. 1998] 3.2i
197 hp- Generation: UA1/3 [1995 .. 1998] [USDM]
- Production: [1995 .. 1998]
-
Sales regions: USA+
-
Power: 197 hp | 147.1 kW | 200 PS
- Engine: , Petrol
-
Center Bore / Hub Bore:
-
Bolt Pattern (PCD): ()
-
Wheel Fasteners: Lug nuts
-
Thread Size:
-
Wheel Tightening Torque:unknown
| Tire | Rim | Offset Range mm | Backspacing mm inches | Tire Weight kg lb |
bar psi
|
||
|---|---|---|---|---|---|---|---|
| OE 205/65R15 94H | 6.5Jx15 ET55 | 53 - 57 | 150 5.91 | 10.9 24.1 | 2.1 30 |
OE
|
|
| 215/55R16 94V | 7Jx16 ET55 | 157 6.18 | 10.7 23.5 | 2.3 33 |
|
||
| 235/45R17 93V | 7.5Jx17 ET50 | 158 6.22 | 10.6 23.3 | 2.3 33 |
|
||
| 245/40ZR18 91W | 8Jx18 ET48 | 162 6.38 | 10.9 24.0 | 2.5 36 |
|
The size of the hole in the center of a wheel is known as the center bore or centerbore.
- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle
Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.
Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.
The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes
hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower
Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).
A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.
Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)
ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)
UN-series Ex.: 9/16" - 18 UNF
Thread size (in) - thread pitch
UNF - Unified National Fine Thread
Example: 215/55 R16 91 T
215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index
The method of attaching a wheel to a hub: wheel nuts or wheel bolts
The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness
The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.
