1. What size are the wheels on the BMW Z3M?2. I have a 1997 Z3 that is equipped with a 2.8l Euro spec engine that has been prepped by the M-Works plant (I think). Is there any way to confirm this (perhaps based on VIN) so that I know the Z3M wheels will fit and can be ordered?
Hi,Kevin.For your 1997 BMW Z3M,the wheel size is 16*7.5,offset 47 PCD 5*120
Hi I have a1997 1.9 1997 Z3. What whells should be on it...it has 17 inch 225-45-17 but I think standard is 16 inch ??
Hi,Paul Johnston,Yes,the standred is 16 inch,But 17-19 inch is also good enough,the size depend on what the car condition you want.
I have a bmw z3 3.0 2001.. will 72.56 fit or 72.6 the only way. Thanks
Hi,Dima,72.6 can fit for your car.
Hello there i have a bmw z3 2.2i 2001 could you please tell me if a set of alloy wheels out of bmw 3 series E91 ET35 5x12 8jx17jj fit the z3 and if so do I need spacers and what size of spacers!? Many thanks
Hi,Jose Filipe,The wheels from BMW 3 series can fit for your Z3.Two offset are very similar,I think you need't to put any spacers.
Hi John thanks for replying but I'm still confused as de front wheels are et 45/46 from factory but if i put on the alloys that i mentioned before wil new alloys sit out a bit of the fender ? Thanks
I have a '99 1.9i Z3, can you tell me what wheels should be fit please?
Hi,Jay Hatton,you can try 16*7.5 offset 31,pcd 5*120
I am looking at new wheels for my Z3 coupe 2.8 1999.
I am unable to find information on the range of offset that will fit front and rear.
Will this set fit?
Front 8X18 ET29Rear 8,5X18 ET40
Hi,Mathias Kamban Larsen,For BMW z3 2.8,The oem offset is 47mm,So,the offset you find are not available.But the wheel size is ok.
Hi. I have the same question as all above. What is the smallest et available for BMW z3 reaer and front?
Actually I have 8Jx17 et 47 with 12 mm spacer on the rear wheels. but I'm thinking to change this spacers
Hi,Tomas,The smallest offset can be 40
1997 1.9L Z3 Convertible. In the 95-03 range of this vehicle I believe there was an M version with 18" rear tires and 17" in front. The rear wheels were wider than the front. Does anyone know what the manufacture part numbers were for those wheels in BMW style 32 o4 42 and if they will fit on a non M 97 Z3 without fitment issues? If the part numbers are not available what about the specifications on those wheels? I am aware that the fenders on the M version are flared and the wheels will extend slightly beyond the bodywork on non M's in that range. That's ok with me. I have seen them and they look good.
Hi. I have a set of 17inch rims for my 1999 Z3, what profile tyres should the front and rear take
Kind regards,Ginger, Cape Town, South Africa
Hi,Ginger Michael Pillay,You can try 225/45R17 for front,and 225/40R17 for the rear.
Thank you John
Hi I have 9jx18 EH2 rims will this fit Z3 & E46Tire size 225/45zr18 & 255/40zr18.
Hi, I have a z3 2.0, is 18" with 35 offset good! Thanks
Hi, I have a 2000 BMW Z3 2.3 Roadster, I was wondering what size wheels will fit it.Thanks!
Hi, Ryan James,The stock wheel size is 16*7 et 38 bolt pattern is 5*120,cb is 72.6mm
what is the specs for some BBS rims for my 99'' Z3 BMW, the largest and max width i can go ... thanks
Hi,Gerald,The stock rims size is 16*7 ET 38,pcd is 5*120.The largest width you can try 16*8 if you still use 16'' tires.
hello, I have a 1999 Z3 coupe right now on 16's. looking to put 19's with a 9 width at front and 10.5 width at rear, will that fit? if so what fitment?
will rims from a 2011 335 sedan fit my 1997 z3 2.8
Hi,david cook,What the rim size of your 1997 z3?I can help you confirm your question
Hello, anybody knows if i can put the following set on my z3 1.9 from 1997? Does it need spacers?I was thinking of the E90 style 161 with 8jx17 ET34 (front) and 8.5jx17 ET37 (rear)Thanks in advance
Hi,Gonçalo Pereira,If the bolt pattern is 5*120,you can try it on your car.
...not sure on what’s the best / biggest / widest / maximum tires or rims will fit your car?
Write about the tires you are currently driving on.