Search Form for vehicle model, tire size or rims Choose a tab below to get fitment data for your vehicle or to find vehicles matching your criteria.

Specify make, year and model to find matching wheels:
Specify values for fields below to find matching vehicles:
Specify values for fields below to find matching vehicles:
Specify values for fields below to find matching vehicles:

1953 Chevrolet Corvette Wheel fitment guide Find out what wheels and tires fit 1953 Chevrolet Corvette

Please select the 1953 Chevrolet Corvette vehicle modifications below and check tables to get wheel size, tire size, bolt pattern (PCD), rim offset and other wheel fitment parameters. If necessary, you can filter them by sales distribution region.

Chevrolet Corvette C1 [1953 .. 1955]

Filter by region:

1953 Chevrolet Corvette C1 [1953 .. 1955] - Modifications

Chevrolet Corvette C1 [1953 .. 1955] 3.8 235cid

150 hp
  • Generation: C1 [1953 .. 1955]
  • Production: [1953 .. 1954]
  • Sales regions: USA+
  • Power: 150 hp | 112 kW | 152 PS
  • Engine: 3.8 L, , Petrol
  • Center Bore / Hub Bore:
  • Bolt Pattern (PCD): ()
  • Wheel Fasteners: Lug bolts
  • Thread Size:
  • Wheel Tightening Torque:
Tire   Rim   Offset Range mm Backspacing mm inches Tire Weight kg lb Tire Pressure (front / rear) bar psi
OE 6.70D15LT 4PR 5Kx15 ET14.3 12.3 - 16.3 90 3.54 1.6 24
6.70D15LT 6PR 5Kx15 ET14.3 12.3 - 16.3 90 3.54 2.0 29
7.10D15LT 4PR 5Kx15 ET14.3 12.3 - 16.3 90 3.54 1.6 24
175/80R15 5Jx15 ET10 86 3.39 10.4 23.0 1.8 26
195/75R15 5.5Jx15 ET10 93 3.66 11.4 25.0 1.8 26

Page update: Sept. 4, 2023, 6:34 p.m.
Tire Glossary
Tire terms you can see on this page

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)

UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.