I want to fit a set of twenties on my nitro will I do damage or cause the car to burn more fuel
Hi, Bernard. If you usually drive on roads with surface in perfect condition(sport tracks), you can use custom 20" set: 245/50 R20 on 20X 8.5J PCD 5x114.3 ET35 DIA72.6. But you are right, usage of large than OEM rims can cause more damage of suspension and transmission.
Can I change out my 20 inch tires (245/50/20 ) on my 2011 Nitro to 16 inch?
Hello cheryl Franklin, you can use 235/65 R17 7.5x17 ET40.7
I have a 2008 Dodge Nitro and my size of tires are 235/65/R17. Can I install the 245/50/R20 its the3.7 V6 model. And what style rims would work? Offset? Never bought rims before, any input will help thx.
with the factory 20x7.5 (40.475 Offset) you can run the 245/50R20. it is tire size that came factory on my 2011 nitro heat. the factory 20" rims are actually 20x7.5 if measured correctly. 20x8.5 is the measurement or the rim and tire width on this website. if you change the offset and rim diameter and only sitting stock it will cause rubbing. hope this helps
Hi, I have a set of 17" Wade Racing alloys pcd 5x114.3Front 9" wide offset 30Rear 10" wide offset 45Will these fit my standard Dodge Nitro & if so what size off road tyres would I need. Thanks.
can i use a 265/70R17 on my 2007 dodge nitro without and problems i have 245 65 r 17 on it now
Hi I have a 2007 dodge nitro r/t. I wanted to use tires that I had from my dodge Durango they are grappler Lt 265/75r16. Any idea If these will fit my nitro?
17 inch rims is the smallest to go with I believe.
Hey! I have a 2008 Dodge Nitro RT with 245/50R20s. I am looking to change to a smaller size. what should I look for to change them to 17's ?
will 245/75R17 fit on my 2008 nitro stock rims ??
Will 245/50R/20s fit on either a rim width of 7.5in or 8.5in? I have stock 7.5 on the truck currently but want to replace with 8.5J and keep the tires. Thx
Hi, Jay,yes,245/50/20 can fit for your new 8.5J car rims.
Tenguna nitro.y quiero ponerle rines adelante 18x8 y atras 18x9 con offset 35 ambos lados.es esto posible?
Tengo una nitro.y quiero ponerle rines adelante 18x8 y atras 18x9 con offset 35 ambos lados.es esto posible?
What is the max tire hight for std dodge nitro?
Hi,Henry,the max tire hight depend on your current tire size,for your car,If your rims is 20'',the max height is 295.If your rims is 16'',the max height is 265
295 and 265 are not height those are widths
Widths also come indifferent profiles with different overall heights .245/70r17 and 265/65r17 are the same height and different widths.
2007 dodge nitro rt has 20" wheels stock looking to put 16s on is that possible or are the brakes to big being the rt with the 4.0?
Yes. I have 16" winter rims that fit for me.
Thats on an r/t? Or standard? The r/ts do have larger brakes
We have a 2013 dodge nitro with twenty inch tires n rims. I want to go den in size.is a fifteen recommended. .
Hi,Beverlylooper,You want to put 15'' tires instead of 20'',it is uncompatible.
have o7 nitro with 20 inch 50 profile live off road about 1/2 mile need smaller dia tire due to mud build up between tire and wheel well so instead of a 29 inch tall tire can i go to 26 inch tall tire and how do i reprogram computer as dealer will not
Hi! If you have the Nitro R/T I believe 17 inch rims is the lowest you could go with, not 16 inch (I guess you meant 16 inch and not 26 inch?). You do not need to reprogram the computer since the rolling circumference must stay within certain limits, for example 5% maximum either too much or too little.
29 inch is the standard outer rolling diameter on standard wheels,even on 17 inch rims. The narrowed 235 /65 r17 compared to the wider profile 20 inch set up, could allow more movement in a sideways direction within the wheel wells, but given time the ride night may have dropped from age and use. An upgrade in suspension could be a suitable consideration to regain lost ride height. Possibly the existing tires and wheel size can be retained in full function.
well i understand that but my original question still is the same can i run a 26.5 to 27.5 rolling diameter on my 07 nitro. i am willing to accept the ground clearance loss as i hope to improve my off road problem of mud building up on tire and between wheel well and tire causing traction control to mis read road condition.i have 1 mile of poor road to travel and under certain conditions is impassable due to mun build up and traction control not allowing full power to wheel or wheels.
To drop to 26 inch diameter is not the best due to the loss of one and a half inches of ground clearance and a drop of approx 11 percent in traction and gear ratio. The ratio being an increased noise level at cruising speeds, the worst being less traction when breaking on wet and slippery roads.