Search Form for vehicle model, tire size or rims Choose a tab below to get fitment data for your vehicle or to find vehicles matching your criteria.

Specify make, year and model to find matching wheels:
Specify values for fields below to find matching vehicles:
Specify values for fields below to find matching vehicles:
Specify values for fields below to find matching vehicles:
±
±

2014 Ferrari California Wheel fitment guide Find out what wheels and tires fit 2014 Ferrari California

Ferrari
Please select the 2014 Ferrari California vehicle modifications below and check tables to get wheel size, tire size, bolt pattern (PCD), rim offset and other wheel fitment parameters. If necessary, you can filter them by sales distribution region.

Ferrari California 2008 .. 2014

Generation
Filter by region:
Canada CDM
Europe EUDM
Middle East MEDM
Russia+ RUS
USA+ USDM

2014 Ferrari California 2008 .. 2014 - Modifications

Ferrari California 2008 .. 2014 4.3

483 hp
USDM CDM
  • Generation: 2008 .. 2014
  • Production: [2008 .. 2014]
  • Sales regions: USA+, Canada, Europe, Russia+, Middle East
  • Power: 483 hp | 360.4 kW | 490 PS
  • Engine: 4.3 L, , Petrol
  • Center Bore / Hub Bore:
  • Bolt Pattern (PCD): ()
  • Wheel Fasteners: Lug bolts
  • Thread Size:
  • Wheel Tightening Torque:
    unknown
Tire   Rim   Offset Range mm Backspacing mm inches Tire Weight kg lb Tire Pressure (front / rear) bar psi
OE 245/40ZR19 94Y front axle
285/40ZR19 103Y rear axle
8Jx19 ET44
10Jx19 ET52
42 - 46 50 - 54 158
192
6.22
7.56
11.4
13.8
25.0
30.3
2.2 32
245/35ZR20 91Y front axle
285/35ZR20 100Y rear axle
8Jx20 ET44
10Jx20 ET52
158
192
6.22
7.56
10.9
13.1
24.0
29.0
2.2 32

See Ferrari California wheel fitment information for other model years:
2014 2013 2012 2011 2010 2009 2008
Page update: Nov. 25, 2022, 5:37 p.m.
Tire Glossary
Tire terms you can see on this page

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)

UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.