Looking for 96 Crown Vic P I replacement alum wheels/rims 16" - can't identify on your site. Thank you
need rims for203 crown vic
Will and 03 & Up Stock Rim Fit On A 99 crown vic
I have some 24 inch greed rims can i put them on my 90 crown vic without body lift i was told i could
Hi,Andrew Martin,No,24 inch rims can not fit for your car.
So ill need ti get that lift kit
Could I got 20s with some tread on them on my 90 crown vic
What is the biggest tire size that will fit an 05 crown vic police interceptor
Hi,Matt,If you car wheels are stock wheels,The biggest tire size is 285/50/16，If not,Show me your current tire size.
got 5 17"rims with almost new snow tires on them -daveemail me at firstname.lastname@example.org
I mean i got 5 16" rims with nice tires on them. im from the pittsburgh area. email me at email@example.com -dave
hi I have a 1986 Crown Victoria and I was wondering would 24s fit on there without doing any modification
Hi,Eddie,Does 24s means 24 inch rims?if yes,it can't fit for.It is too large.
Will 03 grand Marquis wheels fit on 03 crown Vic with no spacers etc.
Will a 98 grand Marquis stock wheels fit on a 93 Ford crown Victoria??
Hi,Julian Felix,No,The offset for grand Marquis is 45mm,but it is 25mm for crown victoria.The difference is too large
They will fit!
Maybe I'm wrong now but a 1998 Grand Marquis has around 10-15 mm ET which the Ford Crown Vic generation 1 also does? Both the vehicles are the same but the Mercury have one previous generation before the Ford, so a Grand Marquis gen 2 (92-97) is the same as Crown Vic gen 1 (92-97) and Grand Marquis gen 3 (98-02) is the same as Crown Vic gen 2 (98-02). Both these generations share the same offset, it wasn't until 2003 och forward, the last generation and facelift of each model, that the offset changed to around 45-50 mm, but they are still the same if the model year is 2003 or above. So, model year 92-02 of either model will fit and 03 and on of either model will fit.
Hi what size of wrench do i need to take the drive shaft u joints off
2005 crown victoria P71 what size wrench do need to take the drive shaft off
Can 20 by 10 fit my06 crown Vic
I have a '08 Crown Victoria [PI] w/ 17" stock steel wheels.I also have a '05 Five Hundred w/ the stock aluminum mag wheels.My wife *hates* the '08 black wheels, so I want to know if the 500 wheels will fit the Crown Vic. [ & vice versa, too.]Many Thanks In Advance, for your assistance w/ this.
Hi,sl0j0n,Which 500 car model you mean?Mustang GT500 or Focus RS500
My car is a 1985, there is no information here for it. :\ I'd like a set of factory rims with center caps.
Hi,Jermaine,You can try to find car wheel like wheel size is 16*7 offset is 34mm,bolt pattern is 5*114.3
Yes I know that, but there is no information here for my car. The list doesn't even include my model year.
Anyone know what offset I can use on my 2005 CV ??I have 16 inch tires but want to use largest width wheel..8 inch I guess...but what offset will give me the widest stance..I see -11 on the wheels I want. Will a wheel with -11 offset fit my 2005 Crown Vic..??? thx G
will my 2011 mustang wheels fit a 2003 crown vic?
Hi,james christensen,Can you show your ustang wheels size?
I was told 18x9 2000 Mustang Cobra wheels would fit my 2000 Crown Victoria. The bolt pattern is correct at 114.3mm (4.5") the backset is 5.94 will that work? If so what tire size would be optimal. Was thinking 255/45. What say you?
Can I put any other police style rims? 2001 crown Victoria police interceptor
...not sure on what’s the best / biggest / widest / maximum tires or rims will fit your car?
Write about the tires you are currently driving on.