Search Form for vehicle model, tire size or rims Choose a tab below to get fitment data for your vehicle or to find vehicles matching your criteria.

Specify make, year and model to find matching wheels:
Specify values for fields below to find matching vehicles:
Specify values for fields below to find matching vehicles:
Specify values for fields below to find matching vehicles:
±
±

2024 MG Windsor Wheel fitment guide Find out what wheels and tires fit 2024 MG Windsor

MG
Please select the 2024 MG Windsor vehicle modifications below and check tables to get wheel size, tire size, bolt pattern (PCD), rim offset and other wheel fitment parameters. If necessary, you can filter them by sales distribution region.

MG Windsor 2024 .. 2025

Generation
Filter by region:
Southeast Asia SAM

2024 MG Windsor 2024 .. 2025 - Modifications

Electric:
EV 134hp

MG Windsor 2024 .. 2025 EV

134 hp
SAM
  • Generation: 2024 .. 2025
  • Production: [2024 .. 2025]
  • Sales regions: Southeast Asia
  • Power: 134 hp | 100 kW | 136 PS
  • Engine: Electric
  • Center Bore / Hub Bore:
    unknown
  • Bolt Pattern (PCD):
    unknown
  • Wheel Fasteners:
    unknown
  • Thread Size:
    unknown
  • Wheel Tightening Torque:
    unknown
Tire   Rim   Offset Range mm Backspacing mm inches Tire Weight kg lb Tire Pressure (front / rear) bar psi
OE 215/60R17 7Jx17
ET - unknown
10.6 23.3
OE 215/55R18 7Jx18
ET - unknown
10.5 23.1

See MG Windsor wheel fitment information for other model years:
2025 2024
Page update: 28/11/2024 09:44
Tire Glossary
Tire terms you can see on this page

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)

UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness

Ply rating denotes tire strength and load capacity, based on its layer count.
Load Range
Ply
Rating
Max. Load Pressure

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.

Load Index represents the maximum load a tire can carry, while Speed Rating indicates the maximum safe speed.
Load Index
Speed Rating
Capacity
Max Speed