Could you tell me what offset I would need in the front an back if I got konig torch rims that are 19" and 8.5 wide In the front and 9.5 inches wide in the rear. Also my car is lowered 1 inch.
Hi,Occ04red,According to my data,the offset for your front car rims is 35mm,the rear is 40mm.For fitment,I think number between 35mm and 40mm is ok.The offset measure for rear rims can have 5mm wider than front rims
So I have a 2004 350z enthusiast and im wondering about tire sizes and rim width I currently have 225 50zr 17 in front and 235 50zr 17 in the rear the rims im currently looking at are 17x8 front and rear any answers to tire and rim sizes or what a good set up would be?
Hi, andymilnak,You can try 17*8.0 235/50/17 for front and 17*8.5 245/45/R17 for the rear.
2005 350z touring convertible Eating front tires,no camber adj front 225/45/18 rear 245/45/18. Would like to install 245/45/18 tires on front and rear so they can be rotated. Will this work?
Hi, Bill,It is ok to do that.
What offsets will clear the front brembo brakes? Stock 17 wheels clear the brembos by the way. I want to get the konig torchs but not sure with what offsett.
Hi.Will rota grid rims 18' 9.5J offset 20 fit my 350z. I'm confused because according to http://www.1010tires.com/Tools/Wheel-Offset-Calculator# they will not fit (they will stick out from underneath the wheelhouse) but there are people with does rims on a 350z.
So will they fit or not?
Best regards from sweden.
Hi just wondering if the 350z wheels will fit onto th nissan primastar van would there be any problems
Rim and tyre sizes are wrong. Standard Rays are 18x8.5 et 33 and rear tyres are 245/45/18.
My sensor lights keep coming on.after I just change them and reset the computer any ideas
KyleQuestion on wheel and tire size for a 2004 350z. Going to do Snetterton wheels size Rear 18x9.5 20 offset with tires 275/ 35/18 and wheel size 18x8 front with 245/40/18 tires. Do you see any problems with this setup. Thanks Gene Grey
Hi,Gene Grey,The standared rims size for your car is 18*8.0 for the front and 18*8.5 for the rear.offset is 40mm.For your wheels,I think the rear wheel width is too big.you can try 9'',And 20mm offset is too low that will make the wheel spokes rub the brake.For the tires size,The front wheel size is not compatible for the standard tire size.You can try 245/45/18
Looking to install rocket bunny v2 kit. Would 18x12 et +20 fit in the front? Trying to sit flush with the extra mm's added by widebody.
I am looking at getting new wheels for my 2004 350z. The fronts are 19x8.5 +20 and the rears are 19x10 +25. would those wheels fit on my stock 350z? if not, what would I have to do to make them fit?
Hi,Jordan,The stock wheel offset is 35-40mm,Your 19'' rims offset is too low,I suggest that you add some spacers like 10mm to adapt it.
I'm looking at a set of wheels for my Brembo brake equipped 350Z that are 19x10 front and 19x11.5 rear. Tire size in front is 245/35/19 and rears are 285/35/19. My question is, what offset would these need to be to fit properly without rub. How can I measure the offset if its not stamped on the wheel?
Hi,David,Normally,The stock wheel offset for 18'' rims is 30mm.So you can try to find wheels' offset within 25mm-35mm.If you want to measure offset by yourself,you need to buy a offset ruler or go to wheel shop for help.
quick question ...would a 235 55 r 18 fit a 350 z 2004 ...
Hi, Raymond Imhoff,What the current tire size of 350 z 2004?I can help you confirm it.
...not sure on what’s the best / biggest / widest / maximum tires or rims will fit your car?
Connect online one-on-one with a mechanic who will answer your questions