will the 17 inch wheels on a 2012 dodge ram fit an 2005 dodge ram
Hi,Derrick,yes,it can fit for your car.
I have 1999 dodge 2500 Cummins turbo diesel and what is the smallest tire i can fit on the factory rims of 2nd gens which they are 16". And where can I find those tires ? Send the link to my email please if any.
Hi,colton,the smallest tire is 245/75/16.And We do not sell any wheels/tires.for your request,you can find your locate car dealers or online shopes.
Hello - I have a 1996 Dodge 2500 4X4 with a V10 and manual transmission (if these specs a difference) and I would like to know if 2015 DODGE OEM 18 inch STEEL/CHROME CLAD wheels will fit with no modifications and standard size tires. The rim width is 8 and the Bolt Pattern is the same as the 16 inch wheels presently on the truck: 8X6.5 . I have a 2 1/2 leveling kit up front also.
Hi, Bill,According to my data,The OEM wheel size for your 1996 dodge 2500 is16*8.0,So.Yes,18'' 2015 dodge 2500 wheels can fit for.What i want you to confirm again is the Offset.The OEM wheel offset for 1996 is 10mm.If you can confirm the 2015 wheels offset between 10mm and15mm,it will be ok.
wheel size for 99 Ram 2500? offset?
Hi,wobbly,the wheel size is 16*8.0. the offset is 10.
Hey there. I have a 2001 Dodge Ram van3500 extended. It's stock 8 lug 16x6.5 stock heavy duty suspension. Can I upgrade to say the Laramie or Cummins wheels off of a dodge truck. Same lug pattern? Which, if any would fit on my van. Thanks a lot.
I was thinking about buying some 18" rims that are currently on a 2004 ram 2500. I have a 97 ram 2500 Cummins. Will these work? I'm not sure what power plant he has at this point.
Hi,deadman,Yes,it can fit for.According to my data,they both share the same bolt pattern.So,it is ok.
will a set of 17 inch rims off a 2007 2500 fit on a 2015 2500 that has stock 18's. Thanks
Hi, Titanium,Yes.It can fit for.But i still suggest that you use 18''
I have a 2015 ram 2500 4x4 with the 18" rims and I am wanting to run 17" after market rims. Can I step down and will they fit and clear the rotor and caliper?
Hi,Michael,yes,you can use 17'' aftermarket wheels.But you should concern more about the wheel pcd and offset.
I have a 2015 RAM 2500 4x4 with 20" wheels and stock 285/60R20 tires (80psi). I want to try to get a bigger offroad tire WITHOUT adding a level kit or spacers. What is the largest tire I can upsize to and not rub? Could I go up to a 285/65 or 295/60? I assume anything over 35" will require lift or level kit (w/ spacer)/
Hi,Andrew,295/60/20 can fit for.
I have a 1998 Dodge Ram 2500 cummins what is the biggest size rim and wheel could you fit? I want 20 x 12 rims with 35's
I have a 1990 dodge 1500 ram will the rims off a 2001 dodge ram 1500 fit my truck
Hi,Mike,Yes.it can fit for.
Will 16x8 wheels 0offset and 41/2 backspacing fit on my 97 dodge 2500
I have a 2015 Dodge Ram 4x4, came stock with 18 inch stock rims. Can I to 20 inch rims without loosing the smooth ride and will I have to put a lift kit on the front suspension?
I have a 1978 Dodge W-200 4x4 w/440 cid engine, the truck sits up fairly high stock with out any mods, I want to change the wheels from the stock 16s to a 20" wheel. What would I need for offset to assure clearance for the pitman arm?
Hi, I have a 2006 Ram Laramie 1500 Mega cab with 17" 8 bolt rims. Will the newer 2014-16 20" Stock Ram Laramie rims fit on my truck w/o problem? Thanks
Hi,Ron,According to my data,it can fit for.They share the same bolt pattern.
Ive got 35-12.5r20 tires. Will the factory offset of 20" rims be enough for my tires bot to stick way out. Will that big tire even fit width wise
Have 2016 ram 2500 cummins. Wheels are 20x8 stock with stock 285/60r20 tires.. Does anyone know what the offset is. I'd like to get a set of 20x9 rims but don't know what offset I should get.
Hi,Jonathan grasser,The stock offset for dodge ram 2500 is 54.6mm in 20'' if the it is 6.7D,if for 5.7i,the offset is 25mm.You can confirm which fuel consumption for your car.
Hi, Jonathan! 20x9 ET40-50mm will be ok
I have a 2011 Ram 2500 Cummins 4x4 with stock wheels and I want to upgrade to a 305/55/20 tire and a 3" lift. What would be the best wheel offset for a 20 x 9 wheel? Also want to keep as much of a factory wheel offset as possible where the tire is not sticking out to far pass the fender.
Hi,Mike,The stock offset for dodge ram 2500 is 54.6mm in 20'' if the it is 6.7D,if for 5.7i,the offset is 25mm.You can confirm which fuel consumption for your car.
Hi, Mike! Factory 20x8 wheels have 54.6mm offset, I think 20x9 ET40-50mm will be ok
Hello I have a 2014 ram 2500 6.7L crew cab with the lt275/70 r18 stock rims. I want to run a summer and winter set with my stock rims being for winter. I'm having a hard time figuring out what to look at for aftermarket rims. I am going to run the same size tire through the summer as we do a lot of camping and I want to keep the same look with the tires not sticking past the fenders. Living on a dirt road would make a mess down the side of my truck and camper. l am going to step up to a 18x9 rim but don't know what offset and backspace I need to be looking for. Thanks
Hi,Steve,The stock rims offset for your car is 20mm,If you want to use 18'',I suggest that you can try 18-23mm.And 9‘’ width is little bigger for front wheels,You can try 18*8.
Ok thank you for your help. What about the backspace on the 18.8 rim?
I have a 2012 ram 2500 bighorn that has 17"wheels for factory. What is the offset and bolt pattern on these?
Hi,phillip,The offset is 20mm and the bolt pattern is 8*165.1
Why my 3500 dodge ram backup camera works sporatic
I have a 2500 Dodge RAM 24 valve 4x4 and was wanting to know if I could put a set of 16x8 6.5 on it since it's originally a 17... want sure if it would fit with the caliper..
Hi, Jeni McCoy,Normally,If the stock wheel size is 17'',you'd better use 17'' and above wheels.
I have a 2006 Dodge 2500 that I am running 295 70 17 boost fuel rims I'm looking to buy a 2016 2500 Ram is the bolt pattern the same on these trucks
Hi I have a 2012 2500 diesel Ram longhorn with 17" tire and wheels. I just found an awesome deal of a set of take off's from a 2015 2500 I know that the bolt pattern is the same so they will bolt on BUT how about the TPS. is this pretty much plug and play or will I have some more that I have to do so everything works as it should ? Thanks
Hi,For update wheels and tire,Just need to confirm the wheel size is similar, bolt pattern are the same,offset is similar.To confirm the tire size,you can use tire calculator
I was wondering what is the biggest tire size you can go on a stock 2012 dodge cummins 2500 Laramie crew cab short box with the stock 17 inch wheels
Hi,Shane Roberts,You can try 285/65/17
Hey, so i bought some wheels the other day. They are off of a 2015 power wagon Laramie. They're chrome the center cap is too small to fit my from axel hub. But they look really good. I have a 85 w250 dodge 1st gen. I'm going to cut the center cap so they can fit over the hub. But I was wondering sense the new wheels are 36 positive offset. If a 2in wheel adapter (spacer) would help it clear the pitmit arm. Maybe not all the way but atleast not rub like crazy. I have 33s on my truck now with 0offset and they run a little. They're 285/75/16. The new tires and wheels I'm putting on are 285/70/17. So they are a hair wider than my other tires. I really want them to work. Can anyone help me please. Thanks!
Hi John. I have a 2010 Dodge 2500 with 265 70 R17 tires-this is stock aluminum's. Found set of wheels off 2006 Dodge with 17" chrome clad. While I'm pretty sure the wheels will fit on my 2010, question is the hole for the tire/wheel stems or TPMS. Are the holes the same size? I do not think the sensors electronics are the same, but if the hole size is the same, I will need to use the 2010 sensors correct because of potential electronic differences correct?
HI,Tom,you'd better use 2010 sensors,If the rims can fit for your 2010,The bolt pattern must be same.
Hi John. Thank you so much for your reply. It is your thought then the hole for the valve stem/TPMS are the same size and use the 2010 sensors?
I have a set of 17 inch wheels from an 04 dodge will they fit on my 1990 dodge d150
Hi,Tim Prichard,What the dodge car model that the wheel you get?Same as D150?
It's was a ram truck that the 17 inch wheel came from not sure if it was a 1500 or a 2500. The hub hole seems a touch small but wheel fits and has matching stud pattern.
JohnI have a 2003 dodge 1500, wondering if2004 dodge 2500 rims will fit the 03 stock of coursethanks josh
Hi,Josh,No,they can't fit for.they have different bolt pattern
will 2015 dodge 2500 4x4 18" oem wheels fit a 2004 dodge 2500 4x4
Hi,Larry,yes,it can fit for.
What about the wheels offset. Are they exactly the same?
Hello... My question is will rims from a 2016 Dodge Ram 2500. Style number Aly2476 Dodge Ram 2500 polished rims # 1ud29xzaaa. Fit my 2001 or 2006 truck. My 2006 ram is a 2500 Laramie and my 2001 is a 2500 Laramie. Both are 4x4.... My intensions are to take my rims off my 2006 and put them on my 2001. The 2016 I'd like to put on my 2006. I acquired new rims and tires. The tires are 275/ 75 r18 can these 2016 rims fit either or truck???? Thanks for your time.
Hi,Max Kozelchik,Yes,You can use your 2016 Ram 2500 to fit on your 2001 ram.For the new rims and tires,275/75/18 is not compatible for your car.
I have a 2003 dodge ram 2500 4x4 with the 5.7. I have found a set of rims with the following specs. Size: 20x9, Lug: 8-165.1, Backspace: 5, Offset: 0, Hub Bore: 126. I am a bit confused on what the last 3 mean and am wondering if these will fit? Your input would be greatly appreciated!
Hey will a 2nd gen dodge 2500 lift kit fit a 1500?
Will the wheels from a 2010 Dodge 2500, fit my 1998 2500? Thanks!
I have a 96 ram 2500 12v. With factory 16.5 what year dodge wheels will fit . Looking for factory 17 or 18 any info will help
Hi,brandon,The bolt patter for your car is 8*165.1,It is not exit in other dodge cars.But you can try Chevrolet Express 6.6 V8 2013
I'm sure this has been asked/answered, but I didn't find it....I have a 2015 MegaCab Dually Diesel 4X4 w/ 2" front end leveling kit. I want to replace the stock 235's on my stock 17" wheels with a bigger, more aggressive tire that fills up the wheel wells better. What is the biggest size tire I can go without sacrificing towing capability? I don't want the rears to stick out past fender too far...maybe 1" or so is ok. Spacers are an option as long as it doesn't affect towing. Thanks!
Hi,David,You can try 295/65/17
I have nearly new studded 265/70 R 17 from my F 150. Now I bought a 2016 RAM 2500 Cummins - with 18 Inch wheels. Can I buy 17 Inch rims to use it with my RAM or is that now allowed because the 18 were the smallest on the Diesel?
Hi,Ralf Passing,Can you also show your 18'' Ram 2500 tire size?I can help you confirm whether the 17'' tires is compatible for your car.If ok,You can buy a set of 17'' rims.
My RAM has 275/70 R 18
Hi,Ralf Passing,265/70/17 Is not compatible for your car.You can try 295/70/17 or other compatible tires.
I have a 2012 RAM 2500 Crew Cab Laramie Longhorn 4x4 w/Cummins. The OEM Tire was 265/70 R17 now upgrading to 35/12.5" R17 What is the OEM Backspace for the OEM 5-spoke Alum wheels that came on this RAM? thanks!
Hi,Tec,It is hard to find the backspace data,But the Offset for the factory rims is 20mm,I think it can also help you.
Thanks John though the reason why I was looking for the Backspace is that I am trying to correlate the OEM wheel backspace with what Carli Suspension has recommended with their kit: http://www.carlisuspension.com/dodge-ram/suspension/backcountry20-3.html ...thanks anyways!
Hi Tec! OE rims have 5.75-6 backspacing and above (ET35-55mm). Without modding you can use 305/70/R17 (34x12"R17). I found some info about using 315/70/R17, but they rub when turning. With rims 3.75-5.25 backspacing (ET0-30mm) you can try 35x12.5"R17 without any modding, exept new alloys, because low offset rims will come out of the wheel arches and tires will not rub suspension elements. Carli Suspension talk about "5.75-6” of backspacing (including factory or near factory spec. wheels)". Also BACK COUNTRY 2.0 + High Clearance Control arms + Full Replacement Leaf Springs and you can run with 37" tires. The choice is yours.
Thank you Oleg and John!
I have a 1999 Ram 2500. It currently has 16 inch wheels, with 245/75r16 tires. They look too small. I have a good deal on getting tires and wheels off a 2014 Ram 3500: 18 inch wheels with 275/70r18 tires. Will they fit on my 1999?
Hi,Chuck,The tire is not compatible.But the wheels is compatible,I suggest that your can chose some other compatible tires.
i have a 1993 gen 1 dodge cummins 2500 le two wheel drive Jesus please help .....
i have a 1993 gen 1 dodge cummins 2500 le two wheel drive Jesus please help ..... i need wheels and tires now .....or yesterday dry rot
I have the same..what did you end up with and did it just bolt on or had to do mods to make it fit?
Can anyone tell me the stock wheel offset for a 2005 Dodge ram 2500 with stock 17" alloy rims.
I have a 2013 ram 2500 4x4 with 6.7 diesel extended cab laremi with 17 inch 8 lug wheels and tires.. does anyone know what is the maximum size rim and tire I can put.. the 17 look dinky and out of place.. someone told me maybe 20x9 8x165 0mm offset but not sure..
Hi,Danny,For 20*9 8*165 0mm,the offset is too small,If you want to use it,you can use a 15mm spacers.For the tire size,you can try 255/55/20
I have a 2012 Dodge Ram 2500 crew cab 6.7 turbo diesel with stock 20 inch rims and 285x60R20 tires on it. I am looking at a set of 35" Nitto Grappler tires mounted on Fuel Hostage Chrome rims that came off of a Ford F250. They are 8 lug with a 40mm offset. Does anyone know if the lug and bolt pattern of the wheels will fit my Dodge and if so would it require a lift kit or spacers to avoid rubbing?
The tire size for the Nitto Grapplers is 35x12.50x20 by the way
Hi,Greg,The diameter for your 285/60/20 tire is 850mm,Nitto tire is 35'' equal to 889mm,According to the tire calculator result,35/12.5/20 is not compatible for your car.For the rims.The offset for Ram 2500 is 20mm,bolt pattern is 8*165.1.The offset is not compatible for F250.
I have a 1998.5 dodge ram 2500 with a 3" body lift what is the biggest 20" tire i can put on my truck.
Hi,dwayne,Can you show your current tire size?
Will A set of 16.5 after market rims fit my 2015 Ram with 18" wheels? Will wheel spacers prevent the caliper from hitting the inside of the wheel?
Forgot to mention they are 8 lug.
I have a 2004 dodge ram 2500 4x4 diesel. Can I put rims and tires from a newer dodge ram 2500?
Hi,Ronald Brown,Yes,it is compaibtle.
I have a 2011 ram 2500, and I was wondering if rims from a 2002 ram 2500 would fit, my 2011 has 17 inch rims on it the 1 from a 2002 r 16 I was wondering if they will clear everything or if I will have some kind of issue
Hi,Chris,If they are both stock rims,It can fit for.if you not confirm,you can show both of these size,I will check it again.
Ihave an 89 dodge. Looking for rims to fit it. Got some off of an 02 dodge but they don't have enough back space. When did dodge change that. What years will fit my 89.
Hi,Steve,What the car model of your dodge?Is it dodge ram-2500?You can show offset of your rims,it can help to confirm another rims.
Following i have a 89 dodge ram 2500 will the new models fit
Is there a difference for the stud length on a 2500 / 3500 01 Cummins for wheels
I have a 2006 Dodge Ram 2500 4x4 5.9 Cummins. Stock rims and tire is a 265/70r17. Will a 275/70r18 tire and rim from a 2015 Ram 2500 fit my truck?
I have a 2004 Dodge Ram 2500 will wheels of a 2016 (275/70R18) Dodge Ram 2500 fit?
Will a dodge 2007 1500 17" factory aluminum rim fit the same rim on a 2003
I want to know if 17" rims from a 2004 Ram 2500 4x4 will fit a 2015 Ram 2500 4x4 with the Cummins diesel engine? What will be needed to interface with the 2015 tpms system?
I have a 2001 Dodge Ram 2500 with OEM 16 inch rims. I would realy like to have 15 inch rims. Is there a problem with the brake caliper? I know that 1999 and older have no problems with that but maybe the 2000 and 2001 have wider calipers?
Will Dodge Ram 250 2012 rims fit 2001 Dodge Ram 250
What is the rim width and offset for factory rims on a 2011 Dodge Ram 2500 diesel?
Hi,Kevin,The wheel width is 17*7.5 and the offset is 20mm.
i just bough some 16" wheels to fit a 2002 dodge 2500 diesel, on the litterature of these wheels it states that these wheels are not for a gas truck... what is the difference and what are the consiquences if I do put them on, or will they even fit ? when i bough these it said 2002 dodge 2500 so they are the proper year just not sure if they will be ok for the diesel
Hi,Robert Poirier,Can you also show the detail size of 16'' wheels?
I have a 2017 Ram 2500 4x4 with 6.4 Hemi it has 245 - 70 - 17 on it. Steel rims Please let me know the tallest and widest tire I can use with stock rims
Will 20" rims from a 2017 ram 2500 4X4 fit onto a 2003 2wd 2500?
Hi,Andy,Yes,it can fit for.
Will the wheels from a 2015 Power Wagon fit on a 2004 Ram 2500?
I have a 2002 Dodge 2500 with the Cummins. Just purchased and the guy has aftermarket Mickey Thompson Classic III. They are 16" and I went to rotate the tires and realized the wheel weights rub. so I switched them back because the front weights were already gone. I have ordered 35x12.5R17 Toyo Open Country AT II, I'm looking at 17x9 wheels but I don't know what offset or backspacing to look for. Any help would be appreciated!
Hi,Cody,For 2002 Dodge 2500,The stock wheel offset is 43mm
I am changing my 2001 duelly diesel to a standard bed. Does anything need to be changed other than the wheels?
I have a 2000 Dodge Ram 2500 with 16' wheels, can you tell me if 18" wheels off a 2017 Ram 2500 fit my truck?
Hi,Eric Spoede,The 2000 Ram 2500 wheel offset is little smaller than 2017 Ram 2500.If you truelly want it,You can add some wheel spacers to change it.
I want to put wheels off a 94 Ford F350 on my 95 Dodge Ram 2500. The bolt pattern matched but does the center hub etc match up??
Based on some previous replies I think I have the answer but want to be sure.
2000 Ram 2500 2WD stock height / wheels, 265/75R16's. Have a set of 275/70R18's available (wheels and tires) from a 2016 Ram 2500.
I've looked at tire size calcs, see it is a little taller and about 1/2" wider. From your posts it sounds like the offset may be off between those years, but not certain.
Is this a wise idea to even consider?
I have a 2008 RAM 1500. The previous owner put 16 inch stock tires and wheels on the front and 17 inch stock tires and wheels on the rear. Since I'm gong to have to buy two 16's or 2 17's, I am curious as to the advantages of either direction.
oops! I'll go post this in the RAM 1500 forum. :-)
I have a 1996 Dodge ram van 2500 with 222/75/15 stock tires on it. I came across some new dodge rims/tires with 275/60/R20. The bolt pattern is the same, just wondering about fitting in the wheel well. Price is too go to pass on. Plus the van needs a little updating
Will the 17" wheels from a 2008 RAM 3/4 ton fit a 2001?
Hi,Ken,The rims offset for 2008 is 43mm-45mm,But for 2001 is 30mm,it is not compatible.
Hey I have a 2004 2500 5.9 manual. I installed a 2” level kit. What are the biggest rim and tire I can fit. Tried a 20x9 with a zero offset and 35x12.50x20 and the fronts rub pretty bad. Will that set up work with a negative offset?
Hi, Jay Hunter,For 20'' Ram 2500 stock rims offset,it is 9Jx20 ET35,So,I think a negative offset may be too small
Hello. I have a 2016 Ram 2500 Crew cab big horn with factory rims. It is a 4x4. Will a 295 70 R18 tire fit with factory height? Thanks for the help.
Hi,Rick Stuve,What the current tire size of your car?I can help you confirm it.
275 70 R18 factory.
I have a 2015 2500 Ram with a 6.4L. I want to change my OEM wheels from 18" to 20" OEM wheels . Will OEM wheels from 2016 - 2018 2500 Ram fit my Ram?
Hi,Johm,yes,you can use it.
What are the tallest and widest tires that I can install on stock 18" wheels for a 2 015 2500 4X4 Ram?
Hi,Johm,the stock tire of 18'' is 275/70R18,You can use tire calculator in home page to find that
I have a 2005 ram 2500 diesel 4x4 that has 17 inch wheels will 20 inch wheels off a 2018 ram 2500 4x4 fit my truck I don't know the offset
Hello. My current factory tires are 275 70 R18. Was looking to put 295 70 R18 tires on without leveling the truck. Will that work or are the tires go to rub? Thanks for the info!
Hi,Rick Stuve,No,these two tires are not compatible.
I have a 2015 Dodge ram 2500 will the stock rims from a 2007 fit?
Hi,Sean,What the detail rims size of your 2015 Dodge ram 2500?I can help you confirm it.
Hello, will the Dodge Ram 2500 laramie rims 20" fit on my 2006 Dodge Ram 1500 Mega Cab?
Hi,Sal,Can you show the detail wheel size of your Dodge Ram 2500 laramie?I can help you confirm it.
I have a 2015 2500 Ram 4X4 with OEM 18" wheels. I found a set of OEM 2 0" wheels off a 2 018 2500 with a 8X6.5 wheel bolt pattern. Will they fit my truck?
Hi,johm,what the offset of that OEM 20''?I can help you confirm it.
I have just got a 2013 ram 2500 4×4 my check tire system light is on i noticed they have 265 r18 on front right 275 r18 on other 3 will this difference b enough to affect this system !
Hi,Roger,You'd better use 4 same tires.or use two 265/18r on front and two 275 r18 on back.
I have 2001 24v 5.9 dodge ram was wondering if i can put on some 2016 18 inch stock rims on my dodge it also has a lift on it already and the the stock rimss comes with some new tires
I got 96 2500 with 265 75 16 will 285 75 16 fit. . I want to go with a taller tire . What will work
Hi,Adam,No,these two tires are not compatible.
Hi,Edgar Lopez,Can you show the 18'' wheel detail?I can help you confirm it.
They are 18" 8x16.5
I meant 8x6.5
I have a 2012 ram 3500 limited with 17 inch stock and wanted to go to a heavier tire ( grater that a 121 rating, hopefully 126 or 129) so i bought a set of 2016 3500 Laramie rims, i purchased 295/70/18 tires and the place i bought them from cannot get them to ride with out bad vibrations around 70 mph, they are now blaming the rims. Has anyone up sized to larger factory rims? Are the model years not compatible? ps I know this tire size will rub in tight turns on factory rims. Thanks
I have a 2000 ram 2500 Cummins 4x4 I am running 295/75/16 on the stock 16x6.5 steel rims with absolutely no rub anywhere. However I want to get 16x8s but I can figure out what offset will either keep the tires where they are or stick out enough to match my fender flares would be awesome.
I have a 2019 2500 6.4L heavy duty big horn. Tires.that came on it are LT275/70R18. I will.be hauling 3 horse Horsetrailer. Are these tires heavy duty enough. Also, what is passable tread depth?
I have a 2010 Dodge Ram 2500 4x4 if I use 2” wheel-spacers can I run 16” wheel on it? And clear the calipers ?
Hi,Jim,The smallest stock rim size for your car is 17''.so 16'' is little small.For wheel-spacers,It depend on the rims' offset.What the offset of your rims?I can help you cofirm it.
...not sure on what’s the best / biggest / widest / maximum tires or rims will fit your car?
Write about the tires you are currently driving on.