2015 Kia Towner Wheel fitment guide Find out what wheels and tires fit 2015 Kia Towner
2015 Kia Towner PU [2015 .. 2025] - Modifications
Kia Towner PU [2015 .. 2025] 2.5 CRDi 4x4
128 hp- Generation: PU [2015 .. 2025]
- Production: [2015 .. 2024]
-
Sales regions: Central & South America
-
Power: 128 hp | 95.5 kW | 130 PS
- Engine: 2.5 L, , Diesel
-
Center Bore / Hub Bore:
-
Bolt Pattern (PCD):
-
Wheel Fasteners: Lug nuts
-
Thread Size:
-
Wheel Tightening Torque:unknown
mm | mm inches | kg lb | bar psi | ||||
---|---|---|---|---|---|---|---|
OE LT195R15 106/104R | 5.5Jx15 ET42 | 40 - 44 | 125 4.92 | 13.9 30.7 |
3.5 4.0 51 58 |
||
195/70R15 C | 5.5Jx15 ET42 | 40 - 44 | 125 4.92 | 9.3 20.5 |
|
||
LT195/75R16 107/105R | 6Jx16 ET38 | 127 5.00 | 13.6 29.9 |
3.5 4.0 51 58 |
|
||
LT205/70R16 110/108R | 6Jx16 ET38 | 127 5.00 | 13.9 30.6 |
3.5 4.0 51 58 |
|
Kia Towner PU [2015 .. 2025] 2.5 CRDi DRW
128 hp- Generation: PU [2015 .. 2025]
- Production: [2015 .. 2024]
-
Sales regions: Central & South America
-
Power: 128 hp | 95.5 kW | 130 PS
- Engine: 2.5 L, , Diesel
-
Center Bore / Hub Bore:
- front axle: 120mm
- rear axle: 120mm
-
Bolt Pattern (PCD):
- front axle: ()
- rear axle:
-
Wheel Fasteners: Lug nuts
-
Thread Size:
-
Wheel Tightening Torque:unknown
mm | mm inches | kg lb | bar psi | ||||
---|---|---|---|---|---|---|---|
OE
LT195R15
106/104R
LT145R13 88/86R |
5.5Jx15 ET42
4Jx13 ET94 |
40 - 44 92 - 96 |
125 158 4.92 6.22 |
13.9 8.4 30.7 18.5 |
3.1 4.0 45 58 |
||
LT195R14
102/100R
5.00R12LT 83/82P |
5Jx14 ET42
3.5Jx12 ET87.5 |
40 - 44 85.5 - 89.5 |
118 145 4.65 5.71 |
13.3 7.2 29.4 15.8 |
3.1 4.0 45 58 |
||
LT195R15
106/104R
5.00R12LT 83/82P |
5.5Jx15 ET42
3.5Jx12 ET87.5 |
40 - 44 85.5 - 89.5 |
125 145 4.92 5.71 |
13.9 7.2 30.7 15.8 |
3.1 4.0 45 58 |
The size of the hole in the center of a wheel is known as the center bore or centerbore.
- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle
Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.
The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes
hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower
Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.
Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).
A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.
Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)
ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)
UN-series Ex.: 9/16" - 18 UNF
Thread size (in) - thread pitch
UNF - Unified National Fine Thread
Example: 215/55 R16 91 T
215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index
The method of attaching a wheel to a hub: wheel nuts or wheel bolts
The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness
Rating
The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.