I have 17x8 0mm American racing mojaves, my buddy want to buy them from me and I`m wondering if they will fit his 2004 Tundra? Thank you
not enough information about the rims to give you an answer. also need to know the hub bore, and lug pattern of the rims.
Will factory 20 inch alloy rims from a 2007 Tundra Crewmax fit on a 2014 Tundra Crewmax that currently has 20 inch rims?
Yes--all rims that fit a 2007 model Tundra will also fit your 2014.
i have a 2005 Toyota tundra sr5 double cab 2wd and am looking to buy a rim 17x8 with a backspace of 4.875" and +10 offset. will they fit if I buy them? thanks kyle.
Hi,Kyle,It can fit for.Does the backspace 4.875'' equal to pcd 139.7mm?
factory is a 7.5 wide +15. which is a backspacing of 4.84 inches. so your backspacing is about the same as a factory wheel, meaning you will have and extra half inch of wheel sticking to the outside of the wheel well. long story short, as long as the rims you are getting have appropriate hub bore and lug pattern, the yes. they will fit just fine.
Hi will 20 inch tundra wheels and tyres fit on 2015 hilux written on rims is 20x 8j 60
Hi,Matt,yes,they can fit on 2015 hilux.
will the wheels on a1015 tundra fit a 2012 tundra????
will the wheel on a 2015 Toyota tundra fit a 2012 tunda??
Hi,chris,yes,it can fit for your car.
put spacers on my 2013 tundra and studs are not long enough can any one tell me the size of the factory wheel studs
Hi,Eric Adams,For 2013 tunfra,The wheel stud is 5*150.offset is 35mm
Hi,Eric Adams,For 2013 tundra,The wheel stud is 5*150.offset is 35mm
I believe he wanted stud size, not spacing and offset. stud size is m14x1.5 that's a 14mm stud with a 1.5mm thread.
Hi, I have a 2008 Tundra with aftermarket 18in wheels running 295/70/R18. I want that offset look that makes the tire stick out an inch or 2. Is there a way I can get that offset without having to buy new wheels. I've heard of brackets you can buy? Do the brackets work and is there any balancing that would need to be done after install?
the "brackets" are called wheel spacers. and they will result in the need for longer lug studs. No, there is no balancing required afterwards, however, they will caused increased pressure on your front suspension components, resulting in the possibility of premature ware.
I have a 2014 Tundra CM with a 3/1 leveling kit. Will BFG A/T KO2 35x12.50 20 fit if I put Bora 1.75 spacers on it? Thanks
will they fit? yes. will they rub? also yes. try going with a 275/65/20. it is aprox 34x11, and should fit without the spacers. with the wider tires, spacers will cause rubbing the inner fender, and no spacers will cause rubbing the uca. assuming you are using factory 20" wheels which are 20x8 +60. you can go with an aftermarket 20x9 +30 and run the same 275/65/20 tires. but the 35x12.50 will rub. like I said, the spacer will probably stop you from rubbing on the uca, but some trimming of the inner fenders may be required to prevent rubbing there.
Hi. Will 17x7.5 2005 tundra rims fit on my 2000 tundra 4x4?
Your information on the stock rim size for a 2003 Tundra doesnt match what came stock on my 03 4x4 TRD. They are 16" x 7" wide with a 15mm offset, not what the information states above
Thank you. It has been corrected.
Will 18" wheels from a 2012 4x4 tundra fit a 2006 4x4 tundra
Hi,John,If the lugs number are same,It can fit for.
where is a guide of what the wheels from a 07 tundra will fit?
Hi,daymon,Can you explain your question?You want to know which car models can fit for 07 tundra wheels?
I was looking at Ballistic Jester wheels 20x9 +12 offset 5x150 and 275 55r20 tires for my stock sr5 trd offroad 07 tundra im running a 18x8 rim now will going to the 1 inch wider rim cause a problem. Leveling is a possibility but i love the rake it has now (im old school that way) any answers would be helpful, thanks in advance.
the tire size should be no problem. the only issue you may come to will be possible rubbing of the inner fender by the outside edge of the wheel. this is not so much because of the increase in rim width, as it is because of the offset of the rim. rubbing of the inner fender is not really a major issue, just annoying. and could be resolved with a level/lift kit. if you don't want to lift, but want to avoid the rub, then I would go with a +30 or so offset.
Will 2016 Toyota Tundra crew max limited edition 20" wheels fit on a 2009 Sequoia Platinum calling for 20 X 8J specs?
Hi,Tim,Can you also show the bolt pattern for your 2016 toyota tundra?Because 2009 Sequoia have two bolt pattern,5*150 and 6*139.7.
if your sequoia is 5 lug, then yes, it will fit fine.
Looking to put stock 05 4runner sr5 17 inch wheels on my 05 tundra DC 2wd. Is there anything I need to look out for. Currently have 20" (265-50-20).
Hi,Scott Eskers,Before you decided,You'd better user tire calculator to test whether the new tires are compatible to your current ones
I have a set of matte Black V-TEC Raptors 20x9.5, one rim is slightly scuffed, all are good to drive on, never have caused irregular tire wear and not warped in any way. We're occasionally switched on and off a 2011 Tundra I had. I'll let go of both the wheels and tires for $900 that's my standing offer, they're well worth it considering I gave nearly 3000.00 for the set 3 years ago. So the tires are Nitto Terra Grapplers LT 305/55 R20, tires have ever bit of 2/3 tread life left. If interested email me at firstname.lastname@example.org
Will 2014 toyota tundra rwd rims fit 2014 toyota tundra 4x4?
Hi,Joe,What the wheel bolt pattern for your 2014 tundra,Is that 5*150 or 6*139.7
5x150. They should fit unless the bore is different
Will any newer Toyota wheels fit my old 1980 4 x 4 pickup. My wheel spec is 7J x 15 with center bore of 106.1 mm, 6x139.7 pcd and offset of 0.0 mm. I want to upgrade from a 15 in to a 16 or 17 in wheel
Hi,Steve Lovas,You can try Toyota FJ cruiser.The factory rims size is 17*8.0,bolt pattern is 6*139.7,offset is 10mm.I think this one can fit for your car.
Will the stock rims and wheels off of a 2007 Toyota Tundra SR5 crewmax fit a 2015 Tundra?
Hi,Jared,Tundra have two bolt pattern,One is 5*150 and another is 6*139.7.So,if you tundra have 5 bolts,it can fit for 2015.
Wanting to put LX 570 wheels on my 2016 Tundra Platinum but they show bore sizes of 110 Lex & 110.5 Tundra. Still work?
Hi,Dale,Yes.it is accessible.
Would 07 tundra wheels fit a 01 sequoia
Hi,Michael Ramos,Both Tundra and Sequoia have two different bolt pattern(5*150,6*139.7).So,You need to confirm firstly that doest it is same,If true,You can use the wheels.
i have an 08 tundra xsp with 20 inch wheels and would like to change out the like new bfg 305 55 20 all terrain tires with something more road friendly...suggestions?
Will 20 in wheels and tires from a 2017 tundra work on my 2012 tundra ?
Hi,George Duncan.Tundra have two bolt pattern edition,5*150 and 6*139.7.So you need to confirm it.
So as long as they're both 5 lug or both 6 lug should fit!?
Will 2016 Toyota Tundra 18" TRD wheels with 275/65r18 tires fit on my 2016 Sequoia platinum with stock 20" rims and 275/55r20 tires without problems or compromises? Both rims are 5x150 bolt pattern. The guys at Big O Tires were concerned about brake calipers fitting when moving to a smaller rim. I have no idea about this. Thanks.
Hi,J Prov,For the brake calipers,You need also show the offset of The TRD rims and your current rims.If they are compatible,It will be safe
Really? Thats great. Both rims are +60mm offset. Kinda wish they were +30, but so it goes. I was just afraid the calipers would be too tight in the wheel itself after talking to Big O.
Hi,J Prov,You mean the Trd rims and your current rims offset all 60mm?if yes,they can fit for.These two tires are also compatible.And if your brake calipers still have not modified,It can fit for.
My 2006 sr5 Tundra oem wheels are 16x7, 15 offset, with 4.5" backspacing. I'm looking at wheels that are 16x8, 0 offset, with 4.5" backspacing. Will it fit without any issues or change in steering and handling?
Hi,JC,The new 16*8 rims offset is too low.It may rub brake caliper.You can add 10mm spacers and try to fit it.
Hi, can i put 20" rims on a 2012 2wd tundra sr5 that came with 18" stock rims?
I have a 2015
Hi,Dave,Can you explain your question?
Please send me the rims pictures for Toyota Tundra 2008,Best regard,Narak.
Hi,Chea Narak,You can find this link http://car.autohome.com.cn/photo/series/21574/12/2871754.html .
Will stock 2015 18" 5 lug tundra rims fit my 2011 tundra. Both are18", 5 lug,.Thanks
will the factory "17 wheels off a 2015 Toyota 4 Runner fit my 2004 Tundra?
I have a 2005 Toyota Tundra Limited with 16" wheels tires 265/70/16. Wondering if a 2010 Tacoma EXT cab with OEM wheels would fit . Wheels:Manufacturer's Part Number: 42611AD031,42611AD030Interchange Number: 560-69461Product Color and Finish: Bright Sparkle Silver Full Face PaintedPosition on Vehicle: Size: 16 X 7Bolt Pattern: 6X138 will these fit my 2005 Tundra, Thanks TIM
Hi,Tim,The bolt pattern for Tundra is 6*139.7,Different from 6*138 of Tocoma.So,it can't fit for.
i need to know spacer size and if i will need longer studs to put 18" cragar ss rims on my 2009 toyota tundra 4 door . what size wheel will work best....
Hi,matt dillon,What the offset of your 18'' rims?the stock rims offset is 35mm.So if the 18'' rims offset is lower you will need spacers
I bought some rims from an 07 Tundra and want to put them on my 2014 but the lugs don't seem to fit right, like they almost fit right thru the hole. What type of lug nuts do I need to buy to attach them properly? Thanks in advance